4.2.1.3. Classification of history output written in odb files

In this section, the various types of history output that can be written in an output data base (odb) file and that can be postprocessed by Odb2Matlab are classified in various categories, depending on the identifiers of the output results that can be extracted from the odb files using Odb2Matlab. In the table presented below only some history variable identifiers are included; Odb2Matlab can handle all the history output variable identifiers contained in Abaqus, provided that the correct identifier is used in the appropriate Odb2Matlab function used for the retrieval of the results. The history output variable identifier that is specified in the input file under the *OUTPUT,HISTORY option is generally different from the history output variable identifier that is used for the extraction of the corresponding history output from the odb file. The correspondence of the two kinds of history output variable identifiers is shown in the following table.

In the following table, each column contains:

First column: Description of the history output quantity

Second column: History output variable identifier as specified in the input file

Third to last column: History output variable identifier as specified in the Python script used for the extraction of the corresponding result from the odb file

DESCRIPTION

OUTPUT ID IN INPUT FILE

OUTPUT ID IN ODB FILE

Acceleration

A

A1

A2

A3

AR1

AR2

AR3

 

 

 

 

Average Shell Section Stress

SSAVG

SSAVG1

SSAVG2

SSAVG3

SSAVG4

SSAVG5

SSAVG6

 

 

 

 

Concentrated Electrical Nodal Charge

CECHG

CECHG

 

 

 

 

 

 

 

 

 

Concentrated Electrical Nodal Current

CECUR

CECUR

 

 

 

 

 

 

 

 

 

Concentrated fluid flow

CFF

CFF

 

 

 

 

 

 

 

 

 

Concentrated Flux

CFL

CFL11

 

 

 

 

 

 

 

 

 

Coordinates (element-type)

COORD

COORD1

COORD2

COORD3

 

 

 

 

 

 

 

Coordinates (node-type)

COORD

COOR1

COOR2

COOR3

 

 

 

 

 

 

 

Creep Strain (Including Swelling)

CE

CE11

CE12

CE13

CE22

CE23

CE33

 

 

 

 

Displacement

U

U1

U2

U3

UR1

UR2

UR3

 

 

 

 

Electrical Potential

EPOT

EPOT

 

 

 

 

 

 

 

 

 

Electrical Reaction Charge

RCHG

RCHG

 

 

 

 

 

 

 

 

 

Electrical Reaction Current

RECUR

RECUR

 

 

 

 

 

 

 

 

 

Element Status

STATUS

STATUS

 

 

 

 

 

 

 

 

 

Energy (Summed over Element)

ELEN

ELASE

ELCD

ELCTE

ELDMD

ELJD

ELKE

ELPD

ELSD

ELSE

ELVD

Energy Density

ENER

CRPTIME

CENER

DMENER

EENER

JENER

PENER

SENER

VENER

 

 

Equivalent plastic strain components

PEQC

AC YIELD1

AC YIELD2

AC YIELD3

AC YIELD4

PEQC1

PEQC2

PEQC3

PEQC4

 

 

Equivalent plastic strain in uniaxial tension

PEEQT

PEEQT

 

 

 

 

 

 

 

 

 

Fluid Cavity Pressure

PCAV

PCAV

 

 

 

 

 

 

 

 

 

Fluid Cavity Volume

CVOL

CVOL

 

 

 

 

 

 

 

 

 

Gel (Pore Pressure Analysis)

GELVR

GELVR

 

 

 

 

 

 

 

 

 

Heat Flux Vector

HFL

HFL1

HFL2

HFL3

HFLM

 

 

 

 

 

 

Internal Flux

RFLE

RFLE11

 

 

 

 

 

 

 

 

 

J-integral

JK

Cpd

J

JKs

K1

K2

K3

T-stress

X

Y

Z

Logarithmic Strain

LE

LE11

LE12

LE13

LE22

LE23

LE33

 

 

 

 

Mass Concentration (Mass Diffusion Analysis)

CONC

CONC

 

 

 

 

 

 

 

 

 

Mechanical Strain Rate

ER

ER11

ER12

ER13

ER22

ER23

ER33

 

 

 

 

Motions (in Cavity Radiation Analysis)

MOT

MOT1

MOT2

MOT3

 

 

 

 

 

 

 

Nodal Flux Caused by Heat

NFLUX

NFL11

 

 

 

 

 

 

 

 

 

Nominal Strain

NE

NE11

NE12

NE13

NE22

NE23

NE33

 

 

 

 

Normalized Concentration (Mass Diffusion Analysis)

NNC

NNC11

 

 

 

 

 

 

 

 

 

Plastic displacements at frame element's ends

SEP

SEP1

 

 

 

 

 

 

 

 

 

Plastic Strain

PE

PE11

PE12

PE13

PE22

PE23

PE33

 

 

 

 

Point Load

CF

CF1

CF2

CF3

 

 

 

 

 

 

 

Pore Fluid Effective Velocity Vector

FLVEL

FLVEL1

FLVEL2

FLVEL3

FLVELM

 

 

 

 

 

 

Pore or Acoustic Pressure

POR

POR

 

 

 

 

 

 

 

 

 

Pore or Acoustic Pressure

POR

POR

 

 

 

 

 

 

 

 

 

Principal creep strains

CEP

CEP1

CEP2

CEP3

 

 

 

 

 

 

 

Principal elastic strains

EEP

EEP1

EEP2

EEP3

 

 

 

 

 

 

 

Principal inelastic strains

IEP

IEP1

IEP2

IEP3

 

 

 

 

 

 

 

Principal logarithmic strains

LEP

LEP1

LEP2

LEP3

 

 

 

 

 

 

 

Principal mechanical strain rates

ERP

ERP1

ERP2

ERP3

 

 

 

 

 

 

 

Principal nominal strains

NEP

NEP1

NEP2

NEP3

 

 

 

 

 

 

 

Principal plastic strains

PEP

PEP1

PEP2

PEP3

 

 

 

 

 

 

 

Principal strains

EP

EP1

EP2

EP3

 

 

 

 

 

 

 

Principal stresses

SP

SP1

SP2

SP3

 

 

 

 

 

 

 

Principal thermal strains

THEP

THEP1

THEP2

THEP3

 

 

 

 

 

 

 

Principal values of backstress tensor for kinematic hardening plasticity

ALPHAP

ALPHAP1

ALPHAP2

ALPHAP3

 

 

 

 

 

 

 

Reaction Force

RF

RF1

RF2

RF3

 

 

 

 

 

 

 

Reactive Fluid Total Volume

RVT

RVT

 

 

 

 

 

 

 

 

 

Reactive Fluid Volume Flux

RVF

RVF

 

 

 

 

 

 

 

 

 

Residual Flux

RFL

RFL11

 

 

 

 

 

 

 

 

 

RMS values of reaction forces

RRF

RRF1

RRF2

RRF3

 

 

 

 

 

 

 

RMS values of relative acceleration

RA

RA1

RA2

RA3

 

 

 

 

 

 

 

RMS values of relative displacement

RU

RU1

RU2

RU3

 

 

 

 

 

 

 

RMS values of relative velocity

RV

RV1

RV2

RV3

 

 

 

 

 

 

 

RMS values of strain components

RE

RE11

RE12

RE13

RE22

RE23

RE33

 

 

 

 

RMS values of stress components

RS

RS11

RS12

RS13

RS22

RS23

RS33

 

 

 

 

RMS values of total acceleration

RTA

RTA1

RTA2

RTA3

 

 

 

 

 

 

 

RMS values of total displacement

RTU

RTU1

RTU2

RTU3

 

 

 

 

 

 

 

RMS values of total velocity

RTV

RTV1

RTV2

RTV3

 

 

 

 

 

 

 

Saturation (Pore Pressure Analysis)

SAT

SAT

 

 

 

 

 

 

 

 

 

Section Force and Moment

SF

SF1

SF2

SM1

 

 

 

 

 

 

 

Section Strain and Curvature

SE

SE1

SE2

SK1

 

 

 

 

 

 

 

Section Thickness

STH

STH

 

 

 

 

 

 

 

 

 

Stress

S

S11

S12

S13

S22

S23

S33

 

 

 

 

Stress Invariant

SINV

INV3

MISES

PRESS

TRESC

 

 

 

 

 

 

Temperature

NT

NT11

 

 

 

 

 

 

 

 

 

Thermal Strain

THE

THE11

THE12

THE13

THE22

THE23

THE33

 

 

 

 

Total acceleration

TA

TA1

TA2

TA3

 

 

 

 

 

 

 

Total displacement

TU

TU1

TU2

TU3

 

 

 

 

 

 

 

Total Elastic Strain

EE

EE11

EE12

EE13

EE22

EE23

EE33

 

 

 

 

Total Fluid Volume Ratio

FLUVR

FLUVR

 

 

 

 

 

 

 

 

 

Total Force

TF

TF1

TF2

TF3

 

 

 

 

 

 

 

Total Inelastic Strain

IE

IE11

IE12

IE13

IE22

IE23

IE33

 

 

 

 

Total Strain

E

E11

E12

E13

E22

E23

E33

 

 

 

 

Total velocity

TV

TV1

TV2

TV3

 

 

 

 

 

 

 

Velocity

V

V1

V2

V3

VR1

VR2

VR3

 

 

 

 

Viscous Forces Due to Static Stabilization

VF

VF1

VF2

VF3

 

 

 

 

 

 

 

Whole Element Volume

EVOL

EVOL

 

 

 

 

 

 

 

 

 

_________________________________________________________________________
Abaqus2Matlab - www.abaqus2matlab.com
Copyright (c) 2017 by George Papazafeiropoulos

If using this application for research or industrial purposes, please cite:
G. Papazafeiropoulos, M. Muniz-Calvente, E. Martinez-Paneda.
Abaqus2Matlab: a suitable tool for finite element post-processing.
Advances in Engineering Software. Vol 105. March 2017. Pages 9-16. (2017)
DOI:10.1016/j.advengsoft.2017.01.006



Created with an evaluation copy of HelpSmith.
To remove this notice, you should purchase the full version of the product.

We support Ukraine and condemn war. Push Russian government to act against war. Be brave, vocal and show your support to Ukraine. Follow the latest news HERE